Rust Bullet Testing Summary
Rust Bullet Testing Summary
| ASTM | Test | Result |
| ASTM – B117 | Seawater Spray Test – 500 Hours (3 Weeks) | No corrosion or loss of film integrity |
| ASTM – D4060 | Abrasion Resistance | 14,000 Cycles |
| ASTM – D522 | Flexibility and Crack Resistance – Mandrel Bend | 12% Elongation – Did not exhibit any cracking or disbonding of the film |
| ASTM – D2794 | Impact Resistance – Rapid Deformation | 28 inch pound level of impact |
| ASTM – D870 | Seawater Immersion – 336 Hours (2 Weeks) | No corrosion or loss of film integrity |
| ASTM – D93 | Thermal Stability | Flash Point 123 °F, Thermal Stability 314 °F |
| ASTM – D2337 | Thermal Shock 160°F and –20°F | No corrosion or loss of film integrity. Coating not affected |
| ASTM – D257 | DC Resistance | 2.3×10(11) ohm-cm with a range of 2.1×10(11) ohm-cm to 2.4×10(11) ohm-cm |
| ASTM – D149 | Dielectric Breakdown and Strength | 8450 volts with a range of 8394 volts to 8492 volts |
| ASTM – G153 | Weatherometer – 168 hours of Accelerated Testing | No corrosion or loss of film integrity |
| ASTM – D3359 | Measuring Adhesion – Crosshatch | 100% Adhesion |
