BLT G-Floor Adhesive & Seaming Products

NOTE: Basic installation of G-Floor© Roll-Out Flooring does not require adhesives of any kind. However, for special applications and professional installation, many of our customers and vendors have used various types of adhesives. BLT has tested and is now recommending the following products. Always read and follow label directions for best results. New: When you use our Pressure Sensitive Adhesive, you can top coat it with our Anti-Stain Top Coat. Check out our new optional trim piece and center strip for an easy seam between two mats! Important Note Marine adhesive has a wide coverage range. Based on professional installation instructions, we suggest a coverage rate of 130 Sq. Ft. per gallon.

Often consumers and installers ask about glues they can find locally. We cannot guarantee the performance of any adhesive we do not sell. Using any brand of an adhesive other than the manufacturers’, the installer assumes the greater risk. That said: Roberts 2310 is an adhesive that has worked well for the non-felt-backed G-Floor material. We have also heard very positive things about the Roberts 7350 for felt-backed material.

WARNING This product can expose you to chemicals including – Vinyl chloride monomer; Carbon black; Ethyl acrylate; Titanium dioxide; Rutile (TiO2); 1,2-benzendikarboxylsyra,di-C8-10-alkyl ester, grenad; Nickel antimony yellow rutile (C.I. Pigment Yellow 53); Quartz; which are known to the State of California to cause cancer and/or Diisodecyl phthalate; which is known to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov