We offer a wide range of concrete repair materials for preparing your floor for a garage floor coating. Below are some of the more common products. Our joint filler can be initially leveled with a putty knife and trimmed with a razor. IMPORTANT We would like to make it clear that filling the expansion joints in your concrete before coating with epoxy is often the part of the project that people mess up. Filling expansion joints is not a required part of coating a floor. If you choose to do so we highly suggest you read the 829 Product information sheet we have developed AND take Justin up on his offer and call him before you install it! Filling joints is done at your own risk and we cannot be held responsible if it does not go as planned — that’s not to say we won’t try and help you fix it. Just stop, read, call and do it right.
NEW We are launching TL831 joint filler. It is easier to use than the TL829 and does not require ‘slicing’. It still does require exact mixing and it will cure quickly. We are also offering a gunnable joint filler but a special caulking gun must be used and returned to us in NEW condition.
- TL829 — Product Information
- Technical Data — TL829 Flexible Joint Sealant
- TL831 — TL831 Pourable Joint Sealer Data Sheet
- Technical Data — TL818 Epoxy Crack Filler
- Technical Data — TL821 Low Modulus Fast Set Gel
- TL Patch — Concrete Quick Patch Kits
The TL PATCH Concrete Patch kits are ideal for repairing spalling concrete, large holes and thresholds. They combine epoxy resins with an aggregate for a tough yet flexible repair. Fast cure and easy to use. Perfect for the DIY epoxy project. No primer is necessary. Coverage varies a lot, but here is a good rule of thumb. You are going to need 1/2 to 3/4# of aggregate for an 1/8″ deep area per square foot. You will need 1-1.5# of aggregate for a 1/4″ deep areas per square foot.
Our joint filler is a no grind filler. Simply fill the joint, use a putty knife to pack and smooth the material. Once cured just scrape off the rest with a razor.
Crack & Joint Repair
Don't show your crack! Repair cracks, and defects in concrete before you coat the floor. Please call for pricing on TLPATCH-XL and TL343-1
TL818 Concrete Repair Patch & Concrete Filler: Covers up to 1000 lft / gallon based on 1/8″ crack
SKU: TL818
Price Each:
TL821 Gel Based Crack FIller Covers up to 1000 lft / gallon based on 1/8″ crack (1 Gallon Kit)
SKU: TL821
Price Each:
TL821 Gel Based Crack FIller Covers up to 1000 lft / gallon based on 1/8″ crack (2 Gallon Kit)
SKU: TL821-2
Price Each:
No Grind Flex Joint Fill 2 Gallon Kit. Covers 60-70 lft TL829-2
SKU: TL829
Price Each:
Light Foot Traffic: 16-24 hrs
No Grind Flex Joint Fill 1 Gallon Kit. Covers 30-35 lft TL829-1
SKU: TL829-1
Price Each:
Light Foot Traffic: 16-24 hrs
TL831 2 Gallon Pourable Joint Filler 74-78 lineal feet
SKU: TL8312G
Price Each:
TL831 2 Gallon Pourable Joint Filler is our premium, easier to use joint filler that eliminates the step of shaving off the excess material. Flexible joint sealant is a two-component 100% solids polymer system designed for applications where a resilient joint material is needed. The two-component material (standard) is supplied with a gray component and a clear component. Please note this will cure very quickly once mixed. Mix only what you can pour immediately. A typical installation is to fill the joint with silica sand to 1/2″ - 3/4″ from the top. For wider joints, you want to be about twice as deep as you are wide.
2 gallon kit @ 1/2″ by 1.0″ yields 74-78 lineal feet.
Small Concrete Patch Kit spalled concrete, holes, and thresholds --6.2 Pounds
SKU: TLPATCH-SM
Price Each:
Large Concrete Patch Kit spalled concrete, holes, and thresholds-- 12.4 Pounds
SKU: TLPATCH-LG
Price Each: