Industrial Strength Concrete Floor Cleaner for Garages Floors, Shops, Industrial and Commercial Floors
Industrial strength cleaner for concrete surfaces. This product is ideal for high use shops, industrial floors, garage floors and commercial locations. 100% biodegradable and environmentally friendly. The product is also highly recommended for trucking fleets, steel mills, cleaning firms, manufacturers, foundries, metal fabricators, printing plants, US Post offices, waste clean up and military applications.
All Weather Floors Industrial Floor Cleaner - 1 Gallon
SKU: TL915
Price Each:
All Weather Floors Industrial Floor Cleaner - 5 Gallon
SKU: TL915-5
Price Each:
All Weather Floors Industrial Floor Cleaner - 55 Gallon. Final Sale. No Returns or Cancellations. Ships LTL Freight
SKU: TL915-55
Price Each:
Price Multiple:
2 or more for quantity discount
Ghostshield 1001 Eco-Etch *No Returns*
SKU: GS1001
Price Each:
GhostShield Eco-Etch 1001. DO NOT CONFUSE WITH PRIOR EcoEtch from Eco Saftey Products. This is a concentrated, environmentally friendly, acid etching solution. While it can etch up to 750 Sq. Ft. We find that 200-400 sq. Ft. is more practical for estimating. Typical concrete will need a dilution rate of 1:1 and net a total coverage of 400 Square Feet while Power Troweled Concrete will need a stronger product that has not been diluted and only cover 200 Sq. Ft. per gallon.
Please note this product cannot be returned due to shipping restrictions.
Application
Application
- Always test a small area before application to ensure the desired ratio, etch time, coverage rates, and to verify application technique.
- Before cleaning or etching, make sure the concrete is free of all oil, contaminants, grease, dirt, and rust stains (will not clean grease, oil, or rust spots.
- First, wet the substrate with water. Apply using a low-pressure pump sprayer. Allow the solution to sit on the substrate for three (3) to ten (10) minutes. Flush thoroughly with clean water. You do not need to neutralize after using Eco-Etch 1001.
Reconstitution
Only mix with water. Mix solution slowly in an open-top plastic container. Stir gently. The ratio varies by desired use: for a lighter etch, two (2) parts water to one (1) part Eco-Etch 1001; for a medium etch, one (1) part water to one (1) part Eco-Etch 1001 and for a heavier etch full strength.
Clean Up
Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state, and federal laws.
Best Performance
- Proper application is the responsibility of the user.
- Make sure the most current versions of product data sheets and SDS are being used.
- For professional use only. Keep out of reach of children.
Precautions/Safety
Avoid contact with skin, eyes, and clothing, do not take it internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.
Related Products
G-Floor Ribbed Mats
The original G-Floor garage floor mat in a residential and commercial grade.
G-Floor Coin Mats
Our commercial grade, original coin pattern, available in 4 widths and multiple lengths.
G-Floor Diamond Mats
Perfect for that ‘Man Cave’ look, the diamond pattern PVC floor mats from BLT.
G-Floor Levant Mats
G-Floor Levant is a lightly textured garage mat for those who want a relatively smooth floor with traction.
Product Photos Click to Enlarge
All Weather Floors TrueLock Industrial Strength Cleaner
This product is a heavy-duty cleaner formulated for versatility and dependability. Its’ uses can encompass anything from industrial floor cleaning to mechanic shop floors and even hot dip tank cleaning. This highly effective, ultra-concentrated formula is a non-flammable detergent that dissolves a wide range of greases and oil-based soils. Naturally occurring, orange-based Terpene hydrocarbons are used as part of this highly effective cleaner. Can also be used on walls, woodwork, and enameled surfaces. Always do a small test spot and increase dilution slowly. Highly effective on many siding products.Safe and Environmentally Friendly
Applicator safety is an essential part of the manufacturing process. Our cleaner contains no caustics, butyl ethers, or chlorinated and petroleum-based solvents. Unlike many industrial strength cleaners, our industrial strength cleaner is 100% biodegradable and environmentally safe.All Weather Floors for Year-Round Cleaning
All Weather Floors is committed to making products that withstand the environmental and high use situations found in the toughest parts of Colorado. Our cleaner is no different. It offers year-round performance and is ideal for cleaning almost any floor.Safe But Strong
We know…. It can’t be safe and tough. Most people thing strong products went out the door with new environmental concerns. All-Weather Floors TrueLock cleaner is different. It is safe to use yet highly effective.Eco Etch
Eco Etch has been added to this page for our customer convenience. There are no product details about the Eco Etch on this page. For more information, visit our Eco Etch page
Finding More Uses Every Day
We introduced this product to clean concrete floors such as garage flooring, industrial floors, epoxy floors, and shop floors. More and more uses get discovered every day. This is a highly effective cleaner. Try something new and let us know!Oil, Dirt, Ink & Grime
Our cleaner has been proven effective on a variety of petroleum-based products as well as dirt, grime, inks and more. The trick is to determine the best concentration.How much do I need
We get asked a lot about coverage. If you dilute the product 4:1 you will easily clean an average two-car garage. If you dilute the product 50:1 you will clean substantially more. In most cases we find initial cleanings require a strong mixture with much better coverage if the product is used regularly.How do I use it
Application instructions can be found in the tabs below. However, we have found a deck brush to be very effective. If you are going to use a pressure washer, do not dispense through the pressure washer. Pre-apply to the floor. A mop is effective for less soiled floors or for spreading the cleaner before using a pressure washer. The product must be thoroughly rinsed and the concrete allowed to dry before applying any coating. All residue must be rinsed off.TrueLock and All Weather Floors are a trademark of All Weather Floors, LLC. Stock images copyright and courtesy of ShutterStock.