Nanotech Anti-Slip Coating

Note: This product does not work with other coatings/sealers and is only effective when applied to ceramic tile, porcelain tile, slate tile, quarry tile, mosaic tile or polished granite.

If you’re worried about what could happen if you slip in the shower, by the pool, or on any other tile surface that gets wet often, Nanotech’s Anti-Slip Coating is the perfect solution to your problems. While being incredibly easy to apply, this coating is long-lasting and provides results in minutes! When applied to your tile or polished granite surface, this coating will create microscopic pores that activate any time the surface comes into contact with water, transforming your floor into a slip-free surface.

Fast + Free Shipping: Orders placed before 2:00 PM MST will ship via UPS Ground from our Colorado warehouse the same day!

Anti-Slip Coating

Anti-Slip Coating Nanotech's Anti-Slip Coating is an invisible, long-lasting, and non-toxic coating that adds slip resistance to ceramic, porcelain, slate, quarry, and mosaic tile as well as polished granite!

 

Nanotech Anti-Slip Coating - 16 fl. oz.


SKU: NT-ASC-16
 

Price Each:

$ 28.95
Nanotech Anti-Slip Coating - 16 fl. oz.
 

Est. Coverage: 56.25 sq. ft. per 16 oz bottle

Provides a quick-and-easy non-slip surface when applied over tile or granite!

Nanotech Anti-Slip Coating - 1 Gallon


SKU: NT-ASC-1G
 

Price Each:

$ 149.55
Nanotech Anti-Slip Coating - 1 Gallon
 

Est. Coverage: 450 sq. ft. per gallon

Provides a quick-and-easy non-slip surface when applied over tile or granite!

Product Photos – Click to Enlarge

Nanotech Anti-Slip Coating

Reduce Slip and Fall Accidents

With tens of thousands of slip and fall accidents in the US per year causing mental, physical, and legal problems, Nanotech’s added slip resistance will put your mind at ease knowing that your wet tile surface has an added layer of protection against slipping. Nanotech’s Anti-Slip Coating goes on to any ceramic, porcelain, or mosaic tile and creates nano-pores that activate any time a liquid touches them. This creates a strong non-slip effect, all while staying completely invisible and keeping your tile looking bright.

Works Underwater

The Anti-Slip coating is excellent for adding slip resistance to the floor of a pool or shower.

Glazed Tiles

This product can be applied over glazed tiles, but has extended wait times. You will have to apply the product at least twice and let it sit for at least 10 minutes each time. This will dull the glazed tile but will increase the tile’s grip.

Maintenance

A surface treated with Nanotech Anti-Slip Coating should be cleaned every 2-3 weeks with water and a mild cleaning agent.

Directions For Use

The Anti-Slip Coating will only bond with floors made of polished granite, ceramic, mosaic, or porcelain tiles as well as slate and quarry tiles. Do not attempt to apply this product to any other material as it will not be able to create the nano-pores and it may alter the appearance of the material.

  • Make sure that your surface has been properly cleaned of contaminants, waxes, and other coatings and is completely dry.
  • Spray the coating onto the dry surface and wait the appropriate amount of time depending on the material:
  • Porcelain tile: 1-2 minutes
  • Ceramic tile: 2-5 minutes
  • Polished Granite: Up to 10 minutes
  • After the required wait time is up, run your fingers across the surface to feel for a difference. If you can not feel a difference, give it an extra minute or two.
  • Once there is a noticeable increase in the grip of the surface, use water to neutralize the treated surface. This is important, as leaving the product on the surface for too long may dull the material.