Coverage Warning:Unless you are doing a multi-coat, grind and polish application, these products are designed to be installed at full strength. While it is true that in some applications the product can be diluted to cover 800 Sq. Ft. and better, we provide realistic coverage based on full strength application.
TL021 Penetrating Sealer (40% Active Ingredients) Dilute 5:1 Makes 6 Gallons
Stop concrete dust in its tracks and seal your concrete with our powerful combination of a densifier and Silane / Siloxane water repellant and sealer. Perfect for basements, garages and exterior surfaces where protection is required without the aesthetic value (and work) of a concrete coating such as an epoxy, stain or similar product.TL37 Concrete Densifier
TL37 is a one component extra strength water based lithium based solution designed to densify cement and concrete substrates. The lithium based densifier reacts with the cementitious ingredients to densify while allowing deep penetration to chemically harden and fortify the substrate. After the chemical reaction occurs, the substrate will be more abrasion resistant and help protect the surface from wear, moisture and efflorescence while remaining breathable. Use on garage floors, shop floors, sidewalks and driveways.
- Full Strength Coverage: 100 – 400 Sq. Ft. Per Gallon
- Real World Coverage: 250- 275 Sq. Ft. Per Gallon
- Diluted Coverage: Up To 800 Sq. Ft. Per Gallon
- Increases durability by improving resistance to freeze thaw effects and improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
The application of this product will increase the abrasion resistance of most substrates. Results will vary according to substrate type.
TL021 Penetrating Sealer Coverage
This product is provided in concentrate. The full concentrate has 40% active ingredients. For better protection, we suggest diluting 5:1 (each gallon makes 6 gallons). You will get coverage of approximately 80 Sq.Ft. per gallon of diluted material. We suggest two coats.
TL39 Concrete Densifier & Waterproofer
TL39 is a one component water based siliconate and lithium based solution designed to densify and add waterproofing characteristics to cement and concrete substrates. The densifier reacts with the cementitious ingredients to densify and add water repellency while allowing deep penetration to chemically harden and fortify the substrate. After the chemical reaction occurs, the substrate will be more abrasion resistant and help protect the surface from wear, moisture and efflorescence while remaining breathable. This product is great for indoor or outdoor application including garage floors, sidewalks and driveways.
- Full Strength Coverage: 100 – 400 Sq. Ft. Per Gallon
- Real World Coverage: 250- 275 Sq. Ft. Per Gallon
- Increases durability by improving resistance to freeze thaw effects and improves abrasion resistance and durability.
- Improves weathering, densifies and reduces efflorescence of natural stone, precast stone and cement.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life
The application of this product will increase the abrasion resistance of most substrates. Results will vary according to substrate type.
TL021 + TL37 Application Guidelines
Apply TL37 Densifier using pump style garden sprayer. Apply at a rate of approximately 250 sq.ft. per gallon over smooth concrete. Use a microfiber mop over the area after applying. The area should be saturated but puddles should not form. Allow the TL37 densifier to dry for 24 hours. Dilute the TL021 Penetrating Sealer 5:1. This should net 6 gallons. Apply at a rate of 80 sq.ft. per gallon, per coat and DO NOT allow the product to dry in between coats. You will need to install two coats. The area should be saturated but puddles should not form.
TL40 Concrete Conditioner + Stain Guard
TL40 is a one component water based ultra small particle size self-crosslinking hydrophobic organic polymer and silane/siloxane designed specifically for use in the grind and polish of concrete/cement as a surface conditioner and stain guard to be applied before the final polishing step to increase long term performance, gloss and stain resistance. It can also be used in DIY applications by mopping it on a floor that has been primed with TL37. One gallon covers 800 – 1200 Sq. Ft. with real world coverage being closer to 800
The 7940 is not a stand alone densifier. It is really a stain guard. If used alone, it tends to penetrate to deep and leave voids on the top of the surface. The 7937 basically densifies first and acts as a primer per say.
- Increases durability and stain resistance and abrasion resistance.
- Improves weathering, densifies and reduces efflorescence.
- Protects and fortifies concrete as it seals against moisture damage.
- Application will reduce dusting and increase concrete life.
- Reduces water absorption into the substrate.
- VOC: 50 grams per liter
TEST AREA:
Concrete substrates vary from geographical regions throughout the country and the actual condition of the concrete can provide varying results. Results can also vary from floor machine weights, RPM speed and the sequence of polishing stages and diamond grit sizes, therefore, test a minimum 4 ft. by 4 ft. area on each type of concrete to determine suitability before undertaking the entire project.
The product may slightly darken the surface. The overall finish characteristics are determined by the polishing diamond grit size and concrete composition.