• Free Shipping Free Shipping
  • 110% Price Match Guarantee 110% Price Match Guarantee
  • 30 Day Money Back Guarantee 30 Day Money Back Guarantee
Coronavirus disease (COVID-19) Update: Garage Flooring is Processing and Shipping Orders.
Payment Options

Race Ramps

Race Ramps

Garage Flooring is proud to offer the complete line of Race Ramps products. This page includes the complete list. Click the upside down triangle on the item below to show all race ramp items.

Race Ramps (RaceRamps) Vehicle Service Ramps and Accessories

Race Ramps (RaceRamps) Vehicle Service Ramps and Accessories

 

56″ RACE RAMPS


SKU: RR-56
 

Price Each:

$ 203.30
56″ RACE RAMPS
 

The 56 inch Race Ramps are perfect for the delicate jobs for your low profile or low clearance vehicle -- they lift your car up 8 inches off the ground at a 10.75 degree incline, giving you rock-solid stability for whether you′re putting your car on display for a show, giving your baby a tune up or changing the oil. The smaller size and lower rise make these puppies extra portable, perfect for toting around to car shows or training sessions. Just toss the 56 inch Race Ramps in the trunk and you′re good to go.

Like all other Race Ramps, they′re tough as nails -- but they′ll be the lightest thing in your garage. The solid, durable construction of our car service ramps and light weight means they′re easy to carry, adjust and maneuver -- plus, they come complete with straps for easy carrying and storage. Weighing about 10 pounds per ramp, these low profile car maintenance ramps won′t wreck your floors, and they won′t rust like metal ramps or crack and splinter like wood, and they′ll last you for years.

56″ XTENDERS


SKU: RR-EX-12
 

Price Each:

$ 116.85
56″ XTENDERS
 

Is your baby really low to the ground? No matter how low you go, Race Ramps XTenders for 56 inch Race Ramps are perfect for especially low profile cars. At last, no more wondering how to get underneath your lowered vehicle for oil changing or other maintenance. Designed to work in conjunction with our 56 and 67 inch Race Ramps, XTenders give you a gentle 6.8 degree incline to raise up your lowered vehicle perfectly. Better yet, once your car′s in place, you can slide the XTenders out to get a bit more extra working room. (Note that the XTenders are only to be used with the 56 inch or 67 inch ramps, not trailer and lift ramps.)
And like all our ramps, our XTenders are solidly built and Unscootable, never slipping or sliding on surfaces from dirt to ice! And don′t worry about scratches of blemishes —XTenders, like all Race Ramps products, won′t hurt your floors.

67″ XTENDERS


SKU: RR-EX-14
 

Price Each:

$ 116.85
67″ XTENDERS
 

Is your baby really low to the ground? No matter how low you go, Race Ramps XTenders for 67 inch Race Ramps are perfect for especially low profile cars. At last, no more wondering how to get underneath your lowered vehicle for oil changing or other maintenance. Designed to work in conjunction with our 56 and 67 inch Race Ramps, XTenders give you a gentle 6.8 degree incline to raise up your lowered vehicle perfectly. Better yet, once your car′s in place, you can slide the XTenders out to get a bit more extra working room. (Note that the XTenders are only to be used with the 56 inch or 67 inch ramps, not trailer and lift ramps.)
And like all our ramps, our XTenders are solidly built and Unscootable, never slipping or sliding on surfaces from dirt to ice! And don′t worry about scratches of blemishes —XTenders, like all Race Ramps products, won′t hurt your floors.

FLATSTOPPERS


SKU: RR-FS
 

Price Each:

$ 253.65
FLATSTOPPERS
 

FlatStoppers® keep tires from flat spotting during long periods of storage.
FlatStoppers® were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad′s concave depression, which helps support more of the tire. This disperses the weight of the car more evenly onto the tire – helping to prevent any flat spotting. The pads measure 22.3″ long x 3.5″ high x 14″ wide, and will accommodate tires up to 12″ wide.
FlatStoppers® will not conduct heat or cold into your tires despite changing floor temperatures.
As with all Brute Industries products, Flatstoppers® are made with the company′s patented super-lightweight 100% solid construction technique – making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers′ textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck®.
FlatStoppers® won′t scratch or otherwise damage floors, and won′t rust.

SHOW MIRROR


SKU: RR-MIRROR-4820
 

Price Each:

$ 291.65
SHOW MIRROR
 

Race Ramps Mirror: a self-contained mirror and travel case that is used to display the underside of a show vehicle. The large acrylic flex mirror is mounted in a patented, lightweight, durable frame that provides a rugged and stylish package that is easy to use, transport, and store... without worrying about a broken mirror. A specially designed travel cover fits in place for safe transport yet quickly removes to reveal the mirror. The Race Ramps Mirror provides a 48″ x 20″ footprint for a large under-vehicle viewing area. It can be used alone or in conjunction with Race Ramps Show Cribs, Pyramids, and Show Ramps. There is no other product on the market like the Race Ramps Mirror--it is another Race Ramps exclusive.

LIGHTED SHOW MIRROR


SKU: RR-MIRROR-4820-LT
 

Price Each:

$ 386.65
LIGHTED SHOW MIRROR
 

Race Ramps Lighted Mirror: a rugged yet elegant self-contained lighted mirror and travel case used to display the underside of a show vehicle. As the latest addition in the Race Ramps Show Mirror series, the lighted mirror includes switchable LED lights to illuminate objects with a vibrant super-white light. The large acrylic flex mirror and LED lighting elements are mounted in a patented, lightweight, durable frame which provides a package that is easy to use, transport, and store… without worrying about a broken mirror. A specially designed travel cover fits in place for safe transport yet quickly removes to reveal the mirror and lights. Power to the lights is provided by connection to the vehicle′s battery, or with an optional add-on battery. The Race Ramps Lighted Show Mirror provides a 48″ x 20″ footprint for a large under-vehicle viewing area. An optional mirror, which is mounted on the inside of the travel cover, is available for even more mirror surface area. The Show Mirror can be used alone or in conjunction with Race Ramps Show Cribs, Pyramids, and Show Ramps. There is no other product on the market like the Race Ramps Lighted Show Mirror–it is another Race Ramps exclusive.

PORTABLE PIT STOP RAMP


SKU: RR-PPS
 

Price Each:

$ 2441.50
PORTABLE PIT STOP RAMP
 

There is a lot of work that needs to be done in preparation for the track, and when every second counts it will be the team with the best tools that gets the job done. Race Ramps portable pit stop makes maintenance on the track and off a breeze. Simply lay the multi-purpose ramp down and drive the vehicle into place. The blocks come apart to make rolling under the car easy and leaving a great amount of room for maneuverability. With this product there is no more need to use cumbersome jacks to lift corners of the car. Safety is paramount during any vehicle maintenance and the Racing Ramps vehicle lift system eliminates the need for unstable jack stands. Get under the car fast and safely with the portable pit stop.
This vehicle lift system can go anywhere and is easily stowed when not in use. Drop it on the garage or shop floor to perform routine maintenance in the comfort of your home. Detail work becomes an effortless task with the portable pit stop. Car show addicts know that it is the details that really matter, and keeping the car off the ground makes reaching the underbody, wheel wells, and other otherwise hard to reach areas accessible for cleaning and touchups. Sure there are a great deal of ramps already on the market today, but none of these one-piece models are as portable as the multi-purpose ramp by Race Ramps. The disassembly of the ramps breaks them down into individual pieces that weigh less than 40 pounds a piece. The pieces are small enough to fit in the trunk or back seat of most cars. Simple tasks like changing the oil have never been so much fun as they will be with this ramp setup.
Each side of the ramp weighs a total of 175 lbs with no removable part weighing over 40 lbs The pit stop ramp has an angle of 10 degrees and raises the vehicle 14″ high. The car platform is able to accommodate a wheel base from 90″ to 115″ wide. There are two models of the portable pit stop, a standard model and a racer model. The racer model have removable cutouts large enough to fit a scale that is 15″ wide and 2.5″ tall while the standard does not have cutouts. Both models were constructed of a light weight polystyrene material that is slip-resistant and will not scratch or dent the surface it is on. When not in use this pit stop ramp can be stacked in a 65″ high space for storage.

PORTABLE PIT STOP RAMP - RACER MODEL


SKU: RR-PPS-R
 

Price Each:

$ 2734.10
PORTABLE PIT STOP RAMP - RACER MODEL
 

There is a lot of work that needs to be done in preparation for the track, and when every second counts it will be the team with the best tools that gets the job done. Race Ramps portable pit stop makes maintenance on the track and off a breeze. Simply lay the multi-purpose ramp down and drive the vehicle into place. The blocks come apart to make rolling under the car easy and leaving a great amount of room for maneuverability. With this product there is no more need to use cumbersome jacks to lift corners of the car. Safety is paramount during any vehicle maintenance and the Racing Ramps vehicle lift system eliminates the need for unstable jack stands. Get under the car fast and safely with the portable pit stop.
This vehicle lift system can go anywhere and is easily stowed when not in use. Drop it on the garage or shop floor to perform routine maintenance in the comfort of your home. Detail work becomes an effortless task with the portable pit stop. Car show addicts know that it is the details that really matter, and keeping the car off the ground makes reaching the underbody, wheel wells, and other otherwise hard to reach areas accessible for cleaning and touchups. Sure there are a great deal of ramps already on the market today, but none of these one-piece models are as portable as the multi-purpose ramp by Race Ramps. The disassembly of the ramps breaks them down into individual pieces that weigh less than 40 pounds a piece. The pieces are small enough to fit in the trunk or back seat of most cars. Simple tasks like changing the oil have never been so much fun as they will be with this ramp setup.
Each side of the ramp weighs a total of 175 lbs with no removable part weighing over 40 lbs The pit stop ramp has an angle of 10 degrees and raises the vehicle 14″ high. The car platform is able to accommodate a wheel base from 90″ to 115″ wide. There are two models of the portable pit stop, a standard model and a racer model. The racer model have removable cutouts large enough to fit a scale that is 15″ wide and 2.5″ tall while the standard does not have cutouts. Both models were constructed of a light weight polystyrene material that is slip-resistant and will not scratch or dent the surface it is on. When not in use this pit stop ramp can be stacked in a 65″ high space for storage.

RACK RAMPS


SKU: RR-RACK-4
 

Price Each:

$ 152.00
RACK RAMPS
 

Rack Ramps by Race Ramps enable you to get modified, low-riding cars onto the service platform or lift without damaging the front end. Their textured surface prevents slipping, they are lightweight, and they come complete with a carrying handle for easy transport and storage. There are two styles of Rack Ramps. Rack-4 Ramps weigh only 10 pounds each and are for a lift that has the ramps permanently attached. Rack-4 Ra mps have a notch in them to accommodate the existing ramp and decrease the angle of approach by making the slope longer. Rack-5 Ramps weigh only 10 pounds each and are made for the four post lift with removable ramps. They have a lip that bridges over the operating rods or cables that run in front of the steel beam.

RACK RAMPS


SKU: RR-RACK-5
 

Price Each:

$ 263.15
RACK RAMPS
 

Rack Ramps by Race Ramps enable you to get modified, low-riding cars onto the service platform or lift without damaging the front end. Their textured surface prevents slipping, they are lightweight, and they come complete with a carrying handle for easy transport and storage. There are two styles of Rack Ramps. Rack-4 Ramps weigh only 10 pounds each and are for a lift that has the ramps permanently attached. Rack-4 Ra mps have a notch in them to accommodate the existing ramp and decrease the angle of approach by making the slope longer. Rack-5 Ramps weigh only 10 pounds each and are made for the four post lift with removable ramps. They have a lip that bridges over the operating rods or cables that run in front of the steel beam.

HOOK-NOSED RACK RAMPS


SKU: RR-RACK-HN14-4
 

Price Each:

$ 313.50
HOOK-NOSED RACK RAMPS
 

Hook Nosed Rack Ramps are a lightweight alternative to the heavy steel ramps typically used with four-post lifts. Weighing as little as 9 pounds each--less than one-quarter the weight of factory steel ramps--Hook Nosed Rack Ramps are easy to move and store. They provide a 6.7 degree angle of approach, enabling low ground clearance vehicles to get on the lift without the front end scraping. Hooked Nosed Rack Ramps come in three sizes, which can accommodate tires up to 16″ wide on the largest model. They are designed as a direct replacement for the heavy factory steel ramps used on a variety of popular four-post lifts. Their patented, super-lightweight, 100% solid construction ensures that the ramps are highly durable, virtually indestructible, and very stable--with the ability to support a 6,000 lb. vehicle. The ramps′ textured coating prevents sliding across floors, including epoxy-coated floors, yet they will not scratch or otherwise damage the floor. They are easy to clean and won′t rust.
Hook Nosed Rack Ramps are a new addition to the Race Ramps product line, and like our current Rack-5 model, has space for the operating rods or cables that run in front of the steel beam. Our Rack-4 model is an extension ramp for lifts with permanently attached steel ramps.

HOOK-NOSED RACK RAMPS


SKU: RR-RACK-HN14-5
 

Price Each:

$ 337.25
HOOK-NOSED RACK RAMPS
 

Hook Nosed Rack Ramps are a lightweight alternative to the heavy steel ramps typically used with four-post lifts. Weighing as little as 9 pounds each--less than one-quarter the weight of factory steel ramps--Hook Nosed Rack Ramps are easy to move and store. They provide a 6.7 degree angle of approach, enabling low ground clearance vehicles to get on the lift without the front end scraping. Hooked Nosed Rack Ramps come in three sizes, which can accommodate tires up to 16″ wide on the largest model. They are designed as a direct replacement for the heavy factory steel ramps used on a variety of popular four-post lifts. Their patented, super-lightweight, 100% solid construction ensures that the ramps are highly durable, virtually indestructible, and very stable--with the ability to support a 6,000 lb. vehicle. The ramps′ textured coating prevents sliding across floors, including epoxy-coated floors, yet they will not scratch or otherwise damage the floor. They are easy to clean and won′t rust.
Hook Nosed Rack Ramps are a new addition to the Race Ramps product line, and like our current Rack-5 model, has space for the operating rods or cables that run in front of the steel beam. Our Rack-4 model is an extension ramp for lifts with permanently attached steel ramps.

HOOK-NOSED RACK RAMPS


SKU: RR-RACK-HN20-5
 

Price Each:

$ 422.75
HOOK-NOSED RACK RAMPS
 

Hook Nosed Rack Ramps are a lightweight alternative to the heavy steel ramps typically used with four-post lifts. Weighing as little as 9 pounds each--less than one-quarter the weight of factory steel ramps--Hook Nosed Rack Ramps are easy to move and store. They provide a 6.7 degree angle of approach, enabling low ground clearance vehicles to get on the lift without the front end scraping. Hooked Nosed Rack Ramps come in three sizes, which can accommodate tires up to 16″ wide on the largest model. They are designed as a direct replacement for the heavy factory steel ramps used on a variety of popular four-post lifts. Their patented, super-lightweight, 100% solid construction ensures that the ramps are highly durable, virtually indestructible, and very stable--with the ability to support a 6,000 lb. vehicle. The ramps′ textured coating prevents sliding across floors, including epoxy-coated floors, yet they will not scratch or otherwise damage the floor. They are easy to clean and won′t rust.
Hook Nosed Rack Ramps are a new addition to the Race Ramps product line, and like our current Rack-5 model, has space for the operating rods or cables that run in front of the steel beam. Our Rack-4 model is an extension ramp for lifts with permanently attached steel ramps.

ROLL-UPS


SKU: RR-RU
 

Price Each:

$ 145.35
ROLL-UPS
 

Sometimes you need to raise your low profile car just a little bit extra to tackle those tougher tasks -- think changing your exhaust. If you don′t want to futz around with a jack and risk scratching up your car, the Rollups Car Ramps are just your ticket. They′re designed to be used along with our 56 inch or 67 inch Race Ramps to give you even more clearance for working on your low clearance vehicle for oil changing, tune ups or other maintenance. Additionally, our Roll Ups can raise the front or rear of the car to allow you to slide a standard floorjack in where you otherwise couldn′t. Rollups are 14 inches wide, and can accommodate tires up to 12 inches wide. And they′re especially portable, weighing only 4.5 pounds each, ready to slip right into your trunk -- making them great to take along to car shows, auto events or the race track.
And don′t forget. Rollups are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! And no matter where you′re working on your low profile car, like all Race Ramps, Rollups won′t dig into, scratch or blemish your floors.

SHOW CRIBS


SKU: RR-SC
 

Price Each:

$ 185.25
SHOW CRIBS
 

Show Cribs are a safe, stylish, and lightweight way to raise your vehicle for display. They can cradle the tire up to 12″ off of the ground or we can cut them down to meet your specifications. Show Cribs are available in two models: a full pyramid tapered on all four sides (RR-SC-P), or for a smaller footprint, the RR-SC. They provide an unobstructed view underneath the car, and their tapered design lends a dramatic air to any vehicle display. A set of four will support 6,000 pounds

SHOW CRIBS - PYRAMID


SKU: RR-SC-P
 

Price Each:

$ 263.15
SHOW CRIBS - PYRAMID
 

Show Cribs are a safe, stylish, and lightweight way to raise your vehicle for display. They can cradle the tire up to 12″ off of the ground or we can cut them down to meet your specifications. Show Cribs are available in two models: a full pyramid tapered on all four sides (RR-SC-P), or for a smaller footprint, the RR-SC. They provide an unobstructed view underneath the car, and their tapered design lends a dramatic air to any vehicle display. A set of four will support 6,000 pounds.

SCALE RAMPS


SKU: RR-SCALE
 

Price Each:

$ 155.80
SCALE RAMPS
 

Scale Ramps rise 2.5″ to work with all racing scales of this height. They are light weight. Less than 3 pounds each, and feature a textured surface that prevents slipping. Scale Ramps are constructed in one solid piece for strength and stability and provide a lower cost alternative to factory ramps.

SCALE RAMPS


SKU: RR-SCALE-2
 

Price Each:

$ 87.40
SCALE RAMPS
 

Scale Ramps rise 2.5″ to work with all racing scales of this height. They are light weight. Less than 3 pounds each, and feature a textured surface that prevents slipping. Scale Ramps are constructed in one solid piece for strength and stability and provide a lower cost alternative to factory ramps.

SLIP PLATE STANDS


SKU: RR-SPS
 

Price Each:

$ 382.85
SLIP PLATE STANDS
 

Race Ramps Slip Plate Stands were created as a replacement for heavy metal wheel alignment stands or Monkey Grease Plate Stands. The concept is clear, the Slip Plate Stand is used usually with a 2 or 4 post lift system. The vehicle is raised on the lift; the Slip Plate Stands are positioned under each tire with a turntable on top of each stand. Then the vehicle is lowered onto the stands ready for alignment. Typically alignment turntables are used atop most alignment stands.
Race Ramps Slip Plate Stands are very light and strong. The base is 18 Inches by 23 inches; they have a huge and stable footprint. Using our Patented Race Ramps Technology, these stands are 100% solid core with zero cavities. Every race Ramps products carries this quality, as well. Solid. Though we don′t advise it, they can be used on sand.
The horizontal surface is reinforced to ensure your new Slip Plate Stands will last for many years of commercial use. The beauty of our Slip Plate Stands, is that you can use them for other applications, such as Car Show display. They are unmarking and will not scratch an epoxy coated garage floor. They also incorporate our ″No-slip″ Race Ramps technology, They simply do not budge.
Race Ramps Slip Plate Stands were created when we were approached by Lesley Cooke, president of Tru-Line Laser Alignment. She contacted us with a special request from Toyota for a custom Slip Plate Stand to go along with our Race Ramps Wheel Stands, they needed a lightweight, portable stand that would work with their portable alignment system to up-fit new cars. We worked with Lesley and turned this custom design around in 30 days from concept to shipping it out the door. We now offer this great design and its many uses to the public.

SHOW RAMPS


SKU: RR-SR
 

Price Each:

$ 135.85
SHOW RAMPS
 

Show Ramps were designed after going to several car shows and seeing what people go through to raise their car up and place a mirror on the ground to display its underside. They can be used to raise up the front, back, or side of the car—or get two sets and raise up the entire car to make it stand out. Show Ramps are a great lightweight (only 6 pounds each) alternative to jack stands, floor jacks, and wooden blocks. They reduce the risk of damaging your car, and they can be transported with no risk of sliding and denting your trunk.

TRAK-JAX


SKU: RR-TJ
 

Price Each:

$ 92.15
TRAK-JAX
 

Trak Jax car ramps were inspired by an auto-crosser that didn′t want to buy a new, high-priced, low-profile jack just to change his tires at the track. These lightweight, durable car lift ramps get low cars up high enough to fit a standard floor jack under the car. At less than 5 pounds each and only 30.1″ long, you can even fit them in the trunk of any sports car. Trak-Jax are available with or without a 1.5″ stop. 

TRAK-JAX WITH STOP


SKU: RR-TJ-S
 

Price Each:

$ 92.15
TRAK-JAX WITH STOP
 

Trak Jax car ramps were inspired by an auto-crosser that didn′t want to buy a new, high-priced, low-profile jack just to change his tires at the track. These lightweight, durable car lift ramps get low cars up high enough to fit a standard floor jack under the car. At less than 5 pounds each and only 30.1″ long, you can even fit them in the trunk of any sports car. Trak-Jax are available with or without a 1.5″ stop. 

TRACK & TRAILER RAMP COMBO


SKU: RR-TKTR-COMBO
 

Price Each:

$ 427.50
TRACK & TRAILER RAMP COMBO
 

Think of these as the perfect ramp trifecta - you can work on and tie down your vehicle using the removeable Service Ends, and swap it out with removeable Trailer Ends. Now you can work on your car, load it into the trailer, and reach the tie downs, all with one ramp set! Since they′re divided in two sections, you can remove the sloped ramp section when servicing the vehicle; now you can get to the sides of your car, without the ramps getting in the way! Don′t need the entire set? Then pick and choose your setup!
And don′t forget. Race Ramps Track & Trailer ramps are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! (We′ve got a trip planned to see if they work on the surface of Mars.) And if you′re working in the garage or in the driveway, like all Race Ramps, Track & Trailer ramps won′t dig into, scratch or blemish your floors.

TRACK & TRAILER RAMP W/SERVICE HEADS


SKU: RR-TKTR-RSE
 

Price Each:

$ 403.75
TRACK & TRAILER RAMP W/SERVICE HEADS
 

Think of these as the perfect ramp trifecta - you can work on and tie down your vehicle using the removeable Service Ends, and swap it out with removeable Trailer Ends. Now you can work on your car, load it into the trailer, and reach the tie downs, all with one ramp set! Since they′re divided in two sections, you can remove the sloped ramp section when servicing the vehicle; now you can get to the sides of your car, without the ramps getting in the way! Don′t need the entire set? Then pick and choose your setup!
And don′t forget. Race Ramps Track & Trailer ramps are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! (We′ve got a trip planned to see if they work on the surface of Mars.) And if you′re working in the garage or in the driveway, like all Race Ramps, Track & Trailer ramps won′t dig into, scratch or blemish your floors.

TRACK & TRAILER RAMP W/TRAILER HEADS


SKU: RR-TKTR-RTE
 

Price Each:

$ 308.75
TRACK & TRAILER RAMP W/TRAILER HEADS
 

Think of these as the perfect ramp trifecta - you can work on and tie down your vehicle using the removeable Service Ends, and swap it out with removeable Trailer Ends. Now you can work on your car, load it into the trailer, and reach the tie downs, all with one ramp set! Since they′re divided in two sections, you can remove the sloped ramp section when servicing the vehicle; now you can get to the sides of your car, without the ramps getting in the way! Don′t need the entire set? Then pick and choose your setup!
And don′t forget. Race Ramps Track & Trailer ramps are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! (We′ve got a trip planned to see if they work on the surface of Mars.) And if you′re working in the garage or in the driveway, like all Race Ramps, Track & Trailer ramps won′t dig into, scratch or blemish your floors.

TRACK & TRAILER SERVICE HEADS


SKU: RR-TKTR-SE
 

Price Each:

$ 156.75
TRACK & TRAILER SERVICE HEADS
 

Think of these as the perfect ramp trifecta - you can work on and tie down your vehicle using the removeable Service Ends, and swap it out with removeable Trailer Ends. Now you can work on your car, load it into the trailer, and reach the tie downs, all with one ramp set! Since they′re divided in two sections, you can remove the sloped ramp section when servicing the vehicle; now you can get to the sides of your car, without the ramps getting in the way! Don′t need the entire set? Then pick and choose your setup!
And don′t forget. Race Ramps Track & Trailer ramps are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! (We′ve got a trip planned to see if they work on the surface of Mars.) And if you′re working in the garage or in the driveway, like all Race Ramps, Track & Trailer ramps won′t dig into, scratch or blemish your floors.

TRACK & TRAILER TRAILER HEADS


SKU: RR-TKTR-TE
 

Price Each:

$ 80.75
TRACK & TRAILER TRAILER HEADS
 

Think of these as the perfect ramp trifecta - you can work on and tie down your vehicle using the removeable Service Ends, and swap it out with removeable Trailer Ends. Now you can work on your car, load it into the trailer, and reach the tie downs, all with one ramp set! Since they′re divided in two sections, you can remove the sloped ramp section when servicing the vehicle; now you can get to the sides of your car, without the ramps getting in the way! Don′t need the entire set? Then pick and choose your setup!
And don′t forget. Race Ramps Track & Trailer ramps are sturdy, solid and Unscootable, hugging the ground and never slipping or sliding no matter the surface -- dirt, wet cement, garages or even ice! (We′ve got a trip planned to see if they work on the surface of Mars.) And if you′re working in the garage or in the driveway, like all Race Ramps, Track & Trailer ramps won′t dig into, scratch or blemish your floors.

TRAILER-MATES - FRONT


SKU: RR-TM-FRT
 

Price Each:

$ 182.40
TRAILER-MATES - FRONT
 

Trailer-Mates make it much easier to tie your low ground clearance vehicle down to the trailer. When a car is parked on the Mates, an additional 3″ of ground clearance is created--giving your more room to reach the vehicle′s tie-down points. They may give you the clearance needed to open the car door and clear the wheel well on the trailer too. Trailer-Mates are extremely durable and lightweight and won′t slide on (or scratch) the trailer surface. Concave depressions in the front Trailer-Mates help keep the vehicle from rolling during transport, while the rear Trailer-Mates are designed to simply drive over, making placement a snap. Trailer-Mate car ramps are ideal for vehicles with tires up to 12″ wide.

TRAILER-MATES - REAR


SKU: RR-TM-REAR
 

Price Each:

$ 171.95
TRAILER-MATES - REAR
 

Trailer-Mates make it much easier to tie your low ground clearance vehicle down to the trailer. When a car is parked on the Mates, an additional 3″ of ground clearance is created--giving your more room to reach the vehicle′s tie-down points. They may give you the clearance needed to open the car door and clear the wheel well on the trailer too. Trailer-Mates are extremely durable and lightweight and won′t slide on (or scratch) the trailer surface. Concave depressions in the front Trailer-Mates help keep the vehicle from rolling during transport, while the rear Trailer-Mates are designed to simply drive over, making placement a snap. Trailer-Mate car ramps are ideal for vehicles with tires up to 12″ wide.

4″ TRAILER RAMPS


SKU: RR-TR-4
 

Price Each:

$ 253.65
4″ TRAILER RAMPS
 

Trailer Ramps RR-TR-4 is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 5.5 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-4 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 4″ high ramps are 46″ long and 14″ wide, reduce angle of approach to 5.5 degrees, and can accommodate tires up to 12″ wide.

5″ TRAILER RAMPS


SKU: RR-TR-5
 

Price Each:

$ 292.60
5″ TRAILER RAMPS
 

Trailer Ramps RR-TR-5 is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 4.3 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-5 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 5″ high ramps are 67″ long and 14″ wide, reduce angle of approach to 4.3 degrees, and can accommodate tires up to 12″ wide.

6″ TRAILER RAMPS


SKU: RR-TR-6
 

Price Each:

$ 263.15
6″ TRAILER RAMPS
 

Trailer Ramps RR-TR-6 is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 8.2 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-6 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 6″ high ramps are 45″ long and 14″ wide, reduce angle of approach to 8.2 degrees, and can accommodate tires up to 12″ wide.

7″ TRAILER RAMPS


SKU: RR-TR-7
 

Price Each:

$ 354.35
7″ TRAILER RAMPS
 

Trailer Ramps RR-TR-7 is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 5.5 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-7 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 7″ high ramps are 74″ long and 14″ wide, reduce angle of approach to 5.5 degrees, and can accommodate tires up to 12″ wide.

7″ TRAILER RAMPS W/FLAP CUT-OUT


SKU: RR-TR-7-FLP
 

Price Each:

$ 363.85
7″ TRAILER RAMPS W/FLAP CUT-OUT
 

Trailer Ramps RR-TR-7-FLP is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Does your trailer door have a door flap? Race Ramps has just the solution for you: simply lower your trailer door and place the door flap upon the nesting cut-out of these specially designed Trailer Ramps and decrease your angle of approach to as little as 5.5 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-7-FLP are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 6 1/4″ high ramps are 74″ long and 14″ wide, reduce angle of approach to 5.5 degrees, and can accommodate tires up to 12″ wide.

8′ TRAILER RAMPS


SKU: RR-TR-8
 

Price Each:

$ 292.60
8′ TRAILER RAMPS
 

Trailer Ramps RR-TR-8 is a slight variation of Race Ramps TR-4 Trailer Ramps. Widely used as Flatbed Towing-Assist Ramps, TR-8s are a great, overall solution. Simply place the trailer door or flat-bed edge onto the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 8.7 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-8 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
TR-8 Trailer Ramps can be used by most Car Trailers, as well as towing vehicles. Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a gradual angle of approach. 8″ high ramps are 54.75″ long and 16″ wide, reduce angle of approach to 8.4 degrees, and can accommodate tires up to 14″ wide.

8″ XTRA-LONG TRAILER RAMPS


SKU: RR-TR-8XL
 

Price Each:

$ 418.00
8″ XTRA-LONG TRAILER RAMPS
 

Trailer Ramps RR-TR-8XL is another variation in the Race Ramps line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 6.3 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-8XL are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.
TR-8 Trailer Ramps can be used by most Car Trailers, as well as towing vehicles. Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a gradual angle of approach. 8″ high ramps are 74″ long and 14″ wide, reduce angle of approach to 6.3 degrees, and can accommodate tires up to 14″ wide.

24″ TRAILER STEP


SKU: RR-TR-SP-24
 

Price Each:

$ 165.30
24″ TRAILER STEP
 

This portable step can be used as a free standing step for your trailer or around the shop to give you the added boost you need to get under the hood of that big rig! It is ideal for reaching the top of trailers or tow vehicles when washing and detailing and also serves as a good bench when servicing your car on Wheel Cribs or Race Ramps. It has a non-slip coating on all sides, is extremely lightweight, and has a strap on each side for easy carrying (or for hanging it on the wall). It also fits in the step well of the trailer.

30″ TRAILER STEP


SKU: RR-TR-SP-30
 

Price Each:

$ 155.80
30″ TRAILER STEP
 

This portable step can be used as a free standing step for your trailer or around the shop to give you the added boost you need to get under the hood of that big rig! It is ideal for reaching the top of trailers or tow vehicles when washing and detailing and also serves as a good bench when servicing your car on Wheel Cribs or Race Ramps. It has a non-slip coating on all sides, is extremely lightweight, and has a strap on each side for easy carrying (or for hanging it on the wall). It also fits in the step well of the trailer.

36″ TRAILER STEP


SKU: RR-TR-SP-36
 

Price Each:

$ 165.30
36″ TRAILER STEP
 

This portable step can be used as a free standing step for your trailer or around the shop to give you the added boost you need to get under the hood of that big rig! It is ideal for reaching the top of trailers or tow vehicles when washing and detailing and also serves as a good bench when servicing your car on Wheel Cribs or Race Ramps. It has a non-slip coating on all sides, is extremely lightweight, and has a strap on each side for easy carrying (or for hanging it on the wall). It also fits in the step well of the trailer.

TRAILER SIDE KICKS


SKU: RR-TR-SK
 

Price Each:

$ 185.25
TRAILER SIDE KICKS
 

Trailer Side Kicks serve two purposes. First, they fit in front of a trailer′s wheel wells to provide a tapered, protective guide between your vehicle′s wheels and the trailer′s steel wheel wells. Tall marker flags indicate their placement and help guide you onto the trailer without any scrapes or scratches. Second, Trailer Side Kicks can be used as ramps for changing a trailer tire. Simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. Trailer Side Kicks lightweight but solid construction enables you to safely use them on any surface—pavement, grass, or even sand-without sinking.
Side Kicks are 12 inches wide, 31 inches long and allow a 7.5 inch lift height. They are extremely durable and stable, supporting up to 8,000 pounds while weighing only 8 pounds each. They won′t gouge, scratch, or otherwise damage your driveway or floor and will never rust

TRAILER SIDE KICK


SKU: RR-TR-SK-1
 

Price Each:

$ 99.75
TRAILER SIDE KICK
 

Trailer Side Kicks serve two purposes. First, they fit in front of a trailer′s wheel wells to provide a tapered, protective guide between your vehicle′s wheels and the trailer′s steel wheel wells. Tall marker flags indicate their placement and help guide you onto the trailer without any scrapes or scratches. Second, Trailer Side Kicks can be used as ramps for changing a trailer tire. Simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. Trailer Side Kicks lightweight but solid construction enables you to safely use them on any surface—pavement, grass, or even sand-without sinking.
Side Kicks are 12 inches wide, 31 inches long and allow a 7.5 inch lift height. They are extremely durable and stable, supporting up to 8,000 pounds while weighing only 8 pounds each. They won′t gouge, scratch, or otherwise damage your driveway or floor and will never rust

8″ WHEEL CRIBS


SKU: RR-WC-8
 

Price Each:

$ 96.90
8″ WHEEL CRIBS
 

Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8″, 10″, or 12″ off the ground (depending on the model), providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8″ or 10″ Wheel Cribs in conjunction with 56″ or 67″ Race Ramps allows your car to be level while raised—useful for changing your oil, for example. Wheel Cribs also can be used for car display and are available in custom sizes.

10″ WHEEL CRIBS


SKU: RR-WC-10
 

Price Each:

$ 101.65
10″ WHEEL CRIBS
 

Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8″, 10″, or 12″ off the ground (depending on the model), providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8″ or 10″ Wheel Cribs in conjunction with 56″ or 67″ Race Ramps allows your car to be level while raised—useful for changing your oil, for example. Wheel Cribs also can be used for car display and are available in custom sizes.

12″ WHEEL CRIBS


SKU: RR-WC-12
 

Price Each:

$ 114.95
12″ WHEEL CRIBS
 

Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8″, 10″, or 12″ off the ground (depending on the model), providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8″ or 10″ Wheel Cribs in conjunction with 56″ or 67″ Race Ramps allows your car to be level while raised—useful for changing your oil, for example. Wheel Cribs also can be used for car display and are available in custom sizes.

ADJUSTABLE 8″ WHEEL CRIBS


SKU: RR-WC-8-2
 

Price Each:

$ 126.35
ADJUSTABLE 8″ WHEEL CRIBS
 

Adjustable Wheel Cribs are a two-piece version of your standard Wheel Cribs. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted in incremental heights that provide clearance for a jack and a spacer. Each set supports 3,000 pounds, yet each crib weighs only 7-10 pounds! They can hold tires up to 12″ wide with diameters from 25″ to 30″. You can use one set as either two 8″/10″/12″ cribs, or four 4″/5″/6″ cribs when the set is split (heights depend on which model you purchase).

ADJUSTABLE 10″ WHEEL CRIBS


SKU: RR-WC-10-2
 

Price Each:

$ 135.85
ADJUSTABLE 10″ WHEEL CRIBS
 

Adjustable Wheel Cribs are a two-piece version of your standard Wheel Cribs. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted in incremental heights that provide clearance for a jack and a spacer. Each set supports 3,000 pounds, yet each crib weighs only 7-10 pounds! They can hold tires up to 12″ wide with diameters from 25″ to 30″. You can use one set as either two 8″/10″/12″ cribs, or four 4″/5″/6″ cribs when the set is split (heights depend on which model you purchase).

ADJUSTABLE 12″ WHEEL CRIBS


SKU: RR-WC-12-2
 

Price Each:

$ 165.30
ADJUSTABLE 12″ WHEEL CRIBS
 

Adjustable Wheel Cribs are a two-piece version of your standard Wheel Cribs. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted in incremental heights that provide clearance for a jack and a spacer. Each set supports 3,000 pounds, yet each crib weighs only 7-10 pounds! They can hold tires up to 12″ wide with diameters from 25″ to 30″. You can use one set as either two 8″/10″/12″ cribs, or four 4″/5″/6″ cribs when the set is split (heights depend on which model you purchase).

WHEEL STANDS


SKU: RR-WS-14
 

Price Each:

$ 272.65
WHEEL STANDS
 

Wheel Stands offer you a 16 inch square working platform to accommodate scales a turntable, or to be used as a display block. They are lightweight (12 pounds per stand), yet sturdy and stable. Their textured surface prevents slipping and they won′t scratch or dent your car or floor.
Race Ramps Wheel Stands were created as a replacement for heavy metal wheel alignment stands or Monkey Grease Plate Stands. The concept is clear, the Slip Plate Stand is used usually with a 2 or 4 post lift system. The vehicle is raised on the lift; the Wheel Stands are positioned under each tire with a turntable on top of each stand. Then the vehicle is lowered onto the stands ready for alignment. Typically alignment turntables are used atop most alignment stands.
Race Ramps Wheel Stands are very light and strong. The base is 18 Inches by 18 inches; they have a huge and stable footprint. Using our Patented Race Ramps Technology, these stands are 100% solid core with zero cavities. Every race Ramps products carries this quality, as well. Solid. Though we do not advise it, they can be used on sand.
The horizontal surface is reinforced to ensure your new Wheel Stands will last for many years of commercial use. The beauty of our Wheel Stands, is that you can use them for other applications, such as Car Show display. They are unmarking and will not scratch an epoxy coated garage floor. They also incorporate our ″No-slip″ Race Ramps technology, They simply do not budge.
Race Ramps Wheel Stands and Slip-Plate Stands were created when we were approached by Lesley Cooke, president of Tru-Line Laser Alignment. She contacted us with a special request from Toyota for a custom Wheel Stand to go along with our Race Ramps Wheel Stands, they needed a lightweight, portable stand that would work with their portable alignment system to up-fit new cars. We worked with Lesley and turned this custom design around in 30 days from concept to shipping it out the door. We now offer this great design and its many uses to the public.

WHEEL CHOCK


SKU: RR-WC
 

Price Each:

$ 58.90
WHEEL CHOCK
 

Standard all-rubber vehicle Wheel Chock. Tailored to use in conjunction with all Race Ramps Products.

2′ x 6′ Racer Mat


SKU: RR-RMAT6
 

Price Each:

$ 46.55
2′ x 6′ Racer Mat
 

The Racer Mat is a soft yet durable folding mat to kneel on or use as a portable creeper, keeping you comfortable and clean while you work on your vehicle. Made out of a material similar to lifejackets, it doesn′t retain water, can′t mold or mildew, and is easily cleaned. Measuring 6′ long by 2′ wide, it is big enough to lie on and yet easily folds in half for storage.

11″ GT Trailer Ramps


SKU: RR-TR-11-2
 

Price Each:

$ 584.25
11″ GT Trailer Ramps
 

The GT Trailer Ramp RR-TR-11-2 came into production due to multiple requests for a longer Trailer Ramp. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Trailer Ramps and decrease your angle of approach to as little as 5 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-11-2 are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology.

Simply place the trailer door or existing ramps (see photo) of your trailer on the notch of these specially designed ramps for a more gradual angle of approach. 11″ high ramps are 131″ long and 14″ wide, reduce angle of approach to 5 degrees

 

livechat