TruAlloy™ — High-Performance Aluminum Metalic Garage Floor Coating

Pricing & Options

TruAlloy Coatings

TruAlloy Coatings TruAlloy is an aliphatic moisture-cured urethane that gets the color from aluminum pigment. It is remarkably easy to install and extremely durable. Note: Special pricing is reflective of new system design, installation, etc. Your feedback will be used to improve the instructions. We would love to feature your photos on the site. You are participating in a soft launch; the packaging and instructions may not be perfected.

 

TruAlloy Kit -- 300 Sq Ft Coverage


SKU: AWF3TA300
 

Base Price:

$ 381.43

On Sale!:

$ 343.29

no coupons or discounts apply
TruAlloy Kit -- 300 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 300 Square foot kit contains:
2 Gallons TruAlloy™ Aluminum
1 Quart TruAlloy™ Aluminum
1 Gallon TruAlloy™ Clear
3 Pounds Flake
1 Pound Fine Anti-Skid
3 Roller Covers
2 Roller frames

TruAlloy Kit -- 500 Sq Ft Coverage


SKU: AWF3TA500
 

Base Price:

$ 667.46

On Sale!:

$ 600.71

no coupons or discounts apply
TruAlloy Kit -- 500 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 500 Square foot kit contains:
4 Gallons TruAlloy™ Aluminum
0 Quart TruAlloy™ Aluminum
2 Gallon TruAlloy™ Clear
5 Pounds Flake
2 Pound Fine Anti-Skid
6 Roller Covers
2 Roller frames

TruAlloy Kit -- 600 Sq Ft Coverage


SKU: AWF3TA600
 

Base Price:

$ 724.76

On Sale!:

$ 652.29

no coupons or discounts apply
TruAlloy Kit -- 600 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 600 Square foot kit contains:
4 Gallons TruAlloy™ Aluminum
2 Quart TruAlloy™ Aluminum
2 Gallon TruAlloy™ Clear
6 Pounds Flake
2 Pound Fine Anti-Skid
6 Roller Covers
2 Roller frames

 

 

TruAlloy Kit -- 750 Sq Ft Coverage


SKU: AWF3TA750
 

Base Price:

$ 884.13

On Sale!:

$ 795.71

no coupons or discounts apply
TruAlloy Kit -- 750 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 750 Square foot kit contains:
6 Gallons TruAlloy™ Aluminum
0 Quart TruAlloy™ Aluminum
2 Gallon TruAlloy™ Clear
7.5 Pounds Flake
2 Pound Fine Anti-Skid
8 Roller Covers
2 Roller frames

TruAlloy Kit -- 800 Sq Ft Coverage


SKU: AWF3TA800
 

Base Price:

$ 1045.71

On Sale!:

$ 941.14

no coupons or discounts apply
TruAlloy Kit -- 800 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 800 Square foot kit contains:
6 Gallons TruAlloy™ Aluminum
1 Quart TruAlloy™ Aluminum
3 Gallon TruAlloy™ Clear
8 Pounds Flake
3 Pound Fine Anti-Skid
8 Roller Covers
2 Roller frames

TruAlloy Kit -- 1000 Sq Ft Coverage


SKU: AWF3TA1000
 

Base Price:

$ 1163.17

On Sale!:

$ 1046.86

no coupons or discounts apply
TruAlloy Kit -- 1000 Sq Ft Coverage
 

TruAlloy™ kits are designed around our system 3 specifications. Each kit will include more than enough material for 2 coats of color and one coat of clear. Flake, antiskid, roller covers and two roller frames are also included with each kit.

The 1,000 Square foot kit contains:
7 Gallons TruAlloy™ Aluminum
1 Quart TruAlloy™ Aluminum
3 Gallon TruAlloy™ Clear
10 Pounds Flake
3 Pound Fine Anti-Skid
11 Roller Covers
2 Roller frames

TruAlloy AWF-100 Aluminum 1 Gallon


SKU: awf-100-1
 

Base Price:

$ 99.00
TruAlloy AWF-100 Aluminum 1 Gallon
 

TruAlloy Aluminum MCU. Two coats of color and one coat of clear suggested.

Coat 1: AWF-100                   250-275 Sq. Ft / Gallon

Coat 2: AWF-100                   300-325 Sq. Ft. Per Gallon

Note: Image shows a quart and a gallon for illustration purposes only.

TruAlloy AWF-100 Aluminum 1 Quart


SKU: awf-100-q
 

Base Price:

$ 52.99
TruAlloy AWF-100 Aluminum 1 Quart
 

TruAlloy Aluminum MCU. Two coats of color and one coat of clear suggested.

Coat 1: AWF-100                   250-275 Sq. Ft / Gallon

Coat 2: AWF-100                   300-325 Sq. Ft. Per Gallon

Note: Image shows a quart and a gallon for illustration purposes only. Coverage is for a gallon. Quarts is 1/4th coverage above.

TruAlloy AWF-192 Clear 1 Gallon


SKU: awf-192-1
 

Base Price:

$ 149.99
TruAlloy AWF-192  Clear 1 Gallon
 

TruAlloy Clear MCU. Top Coat only. Not designed for direct to concrete

 375-400 Sq. Ft / Gallon

One Coat over TruAlloy Aluminum if there is no flake or flake up to 1# per 100 Sq. Ft. For full broadcast or more flake than specified above use two coats.

Stock Flake -- 5#


SKU: 14SF
 

Base Price:

$ 34.99
Stock Flake -- 5#
 

Polyurea flakes for garage floor coating system -- 5# of flake

48203 Phenolic Core 9″ Pro-Grade Woven Shed-Resistant Roller Cover - 3/8″ Nap


SKU: 48203-1
 

Base Price:

$ 5.84
48203 Phenolic Core 9″ Pro-Grade Woven Shed-Resistant Roller Cover - 3/8″ Nap
 

48203 Phenolic Core 9″ Pro-Grade Woven Shed-Resistant Roller Cover - 3/8″ Nap

Anti-wear and Soft Texture Anti Skid -- Tabular Aluminum BULK 1# (.6 - 1# / gallon)


SKU: AntiSkid
 

Base Price:

$ 14.99
Anti-wear and Soft Texture Anti Skid -- Tabular Aluminum  BULK   1# (.6 - 1# / gallon)
 

Tabular Aluminum anti skid

All Weather Floors Industrial Floor Cleaner - 1 Gallon


SKU: TL915
 

Base Price:

$ 39.99
All Weather Floors Industrial Floor Cleaner - 1 Gallon
 

Our industrial floor cleaner a highly concentrated specifically for use on concrete. Suggested dilution is 4:1 for heavy degreasing, 8:1 for moderate cleaning and 1 cup per gallon for light cleaning. Product must be allowed to sit for 5 minutes and then completely rinsed. The concrete must be allowed to dry before coating.

Gel Acid Etch Medium. No Returns, All Sales Final on this product.


SKU: TGP
 

Base Price:

$ 79.99
Gel Acid Etch Medium. No Returns, All Sales Final on this product.
 

Tek Gel™ for Profiling: – Medium grade gelled acid.

TEKGEL Home | Etching ConcreteTGP is used for etching concrete when: A 120 sand paper grit opening or profile is required. This is the profile most manufacturers of coatings, sealers and paints require in order for them to stand behind the warranty of their products. The secondary colorant is not an acid based stain. We have many contractors use TGP and still get fantastic acid stain burn, however, unless you′re a seasoned applicator, you may be playing with fire. TGP is designed to be aggressive on top laitance.

Price Note: 2 Gallons $87.30 each... 3 Gallons 82.80 Each ... 4 Gallons 80.55 each. The price varies up to 12 gallons based on INCLUDED HazMat fees


Color Chart
Color Chart
Calculator
Calculator
Photos
Photos
Shipping
Shipping

TruAlloy™ Concrete Coating

You are looking to coat your garage floor, and frankly, you can’t believe how painful the process is. You need to be part chemist, part mason, and a whole lot of lucky. Then you have to hope that the first time you pull your wife’s sports car into the garage, it does not take your precious time and money right off the floor with hot tire lifting! It is 2021; surely, there is a way to coat a concrete surface that does not involve precise chemical mixing and 20-minute work times. For years we have been on the forums preaching that there is no ‘silver bullet’ for this problem. As it turns out, there is a ‘TruAlloy’. TruAlloy™ is a trademark of All Weather Floors®, LLC NOTICE: We are unable to ship to areas that fall under South Coast Air Quality Management District Rules in CA.  

Proven Technology

TruAlloy for Garage Floors is not a new technology. It has been time-proven on the floors of industrial buildings, exterior applications, and countless garage and commercial projects. TruAlloy is a one-part moisture-cured urethane that is over 50% solids by volume. The clear coat is over 60% solids by volume. It comes in one can. You open it, mix it for three minutes, and apply it to a clean surface. This is not fairy dust or a pipe dream; the product’s phenomenal results were achieved after years of refinement, years of extensive scientific testing, and even more years of successful application on top of successful application.

Thicker is Better

Coatings companies love to give great coverage rates that make their product seem less expensive and keeps you coming back for more. We prefer to give you the amount of product you need the first time so your floor comes out perfectly. Coat 1: AWF-100 250-275 Sq. Ft / Gallon. Coat 2: AWF-100 300-325 Sq. Ft. Per Gallon. Clear-Coat: AWF-192 375-400 Sq. Ft Per Gallon

Forget the Hard Stuff & Forget the Guess Work

No need for exact measurements of Part A and Part B because it’s only one part. Installation Temperature? 50 Degrees F to over 100 Degrees F for the color material. Clear requires temperatures over 50. Pot life? How about a couple of hours. Open the can, mix it for three minutes, pour out what you can use, and tap the lid back on. See further explanation under working time.

Aluminum Testing

Abrasion Resistance Method: ASTM D4060, CS 17 wheel, 1000 cycles, 1 KG Load Result: 18 mg Loss Adhesion: Cross Cut Method: ASTM 3359 Result: Passes 5 Adhesion: Elcometer 106 Method: D4541 Result: Exceeds 500 PSI Dry Heat Resistance Method: ASTM D2485 Result: 400ºF Flexibility: Conical Bend Mandrel, 180º Bend Method: ASTM D522 Result: Passes 1/4” Impact Resistance Method: ASTM D2794 Result: Direct – 160 in. lb. Pencil Hardness Method: ASTM D3363 Result: 4H Salt Fog Resistance Method: ASTM B117 Result: Passes 1200 hrs Accelerated Weathering Method: ASTM D-4587, QUV Result: Passed: 1500 hours

Flake Shortage

Torginol has announced flake allocations, shortages, and limited color availability. We are continuing to stock as much as possible for our customers. Full broadcast floors and ‘other’ flake colors should see information of the color flake shortage prior to ordering. We will only be shipping flake to customers who order coatings. Orders for flake only or unreasonable amounts of flake will be refunded.

All Weather Installation

TruAlloy Aluminum is perfect for floors that must be coated in the winter. Our product cures and has great adhesion down to inside ambient and concrete temperatures of 50 degrees.

Primer?

We suggest two coats of TruAlloy Aluminum. The first is applied as a primer and the second as your color coat.

Three Basic System Options

System 1 One One coat of TruAlloy aluminum and one coat of clear will provide adequate protection for light use and allow you to broadcast flake. It is not a true decorative concrete coating in that the first coat can absorb at varying rates, causing inconsistencies in the finish. It also has a higher likelihood of roller marks. Certainly not our first choice, but it does a good job of protecting the concrete. System 2 System two is two coats of the AWF-100 Aluminum with no flake and no clear. The advantage of this system is it is inexpensive and can be installed almost any time of year. System two does not have the abrasion resistance offered by system 3. System 3 System three is our first choice for a decorative concrete TruAlloy application. It can be done with or without flake and has outstanding color consistency and abrasion resistance. All of our kits are built around system 3.

Wiggle Room

Our calculator and kits are based on the worst-case scenario. Small adjustments to total square footage are acceptable so long as you fall within the recommended spread rate.

400 Degrees

Hot tire lifting? Water boils at 212 degrees F. Temperatures over 140 degrees can cause third-degree burns. TruAlloy has proven itself in continuous temperatures up to 400 Degrees F. Point blank, TruAlloy puts hot tire lifting on ice. Your tires simply can’t get hot enough.

Working Time & Pot Life

The phrase unlimited pot life has become common in this industry. We even use it with some products. This product is moisture-cured. That means that when the product is exposed to the air, it starts to cure. When poured out of the can, you can expect it to begin thickening in one to two hours. The good news is you can seal the can back up and take as long as you need for each coat. It is generally not possible to store a can once open.

Clear Testing

Important Note: Abrasion results are greatly improved with the addition of our anti skid. Abrasion Resistance Method: ASTM D4060, CS 17 wheel, 1000 cycles, 1 kg load Result: 23 mg Loss Bond Strength Method: ACI 403 Result: 325 PSI (Concrete Fails) Dry Heat Resistance Method: ASTM D2485 Result: 350ºF Flexibility: Conical Bend Mandrel Method: ASTM D 522, 180º Bend Result: Passes 1/8” Impact Resistance Method: ASTM D 2794 Result: Direct – 160 in. lb. Result: Reverse – 160 in. lb. Pencil Hardness Method: ASTM D3363 Result: H Sward Hardness Method: D2134 Result: 44